Can 3D printed parts be painted, dyed, or colored?
Works on all technologies. Best with primer, spray paint, brush, or airbrush. Sand the surface first (220–400 grit).…
Can you fix warping or print failures?
If warping or print failure happens during production, we handle it — you won't receive a failed or warped part. 1.…
Can you help me choose the right finish for my part?
The right finish depends on how your part will be used and how you want it to look. Here are the main options, and when…
Can you match a specific Pantone color?
Provide the Pantone code, a physical sample, or a hex code. Custom painting gives the most accurate match on any…
Do you offer assembly of multi-part projects?
Yes — Makelab can assemble printed parts as part of an order. This is common for prototypes with multiple components or…
Do you offer dimensional inspection or measurement reports?
Yes — Makelab can provide dimensional checks and reports for projects that require documentation. Standard orders…
Do you offer painting or custom finishing?
Yes. Makelab offers finishing services beyond standard support removal and cleanup, including painting, priming…
Do you offer part labeling or numbering?
Yes — part labels or numbers can be built into the CAD file before printing. This ensures traceability across…
If I split my part to 3D print in pieces, can you assemble it for me?
If your project requires splitting the part into multiple pieces for printing, our team can handle the assembly for an…
If my part turns out perfectly, can I expect this if I order this exact part again?
If your part printed perfectly and you place a repeat order using the same file, material, print method, and finish…
What are the differences between quality levels?
FDM printing: At any quality level, FDM prints will show visible layer lines. Higher quality settings produce finer…
What causes layer lines and how can I minimize them?
Layer lines are the visible horizontal lines on 3D printed parts where each layer stacks on the previous one. They're…
What happens if my design requires support removal?
Support structures are removed as part of standard post-processing. FDM and SLA require supports for certain…
What happens if my part fails during printing?
If a part fails during printing, Makelab will reprint it at no additional cost. Part failures can occur due to geometry…
What quality checks do you perform?
Makelab performs multiple quality control (QC) checks throughout production, and every order gets a final check by a…
Why are there marks where supports were removed?
Support marks are normal surface imperfections where support structures contacted your part during printing. They're an…
Help Center